Tune Ups
Clean Bikes Only
Class 1 E Bikes Only
Road/Gravel Bikes select Tune 1 or 2 ​
​
#1 / 1.5-2 hours labor -$200
rides 3-4 times a week / every 1-3 months
rides 1-2 times a week / every 3-6 months
-
Drivetrain clean, lube, & adjusted
-
Cranks removed bottom bracket cleaned & lubed
-
*EMTB gets motor bolts torqued
-
Wheels trued and hubs adjusted
-
Bolt check
Socal League Rider can use this monthly during season​
#2 / 3-4 hours labor - $300
rides 3-4 times a week / every 3-6 months
rides 1-2 times a week / every 6-9 months
​Includes
-
Drivetrain clean, lube, & adjusted
-
Cranks removed bottom bracket cleaned & lubed
-
*EMTB gets motor bolts torqued
-
Wheels trued and hubs adjusted
-
Bolt check
plus
-
Headset service
-
Brake service (includes bleeds)
-
Hub service
-
Tire sealant
#3 / 4-5 hours labor - $500
rides 3-4 times a week / every 3-6 months
rides 1-2 times a week / every 6-9 months
-
Drivetrain clean, lube, & adjusted
-
Cranks removed bottom bracket cleaned & lubed
-
Wheels trued and hubs adjusted
-
Bolt check
-
Headset service
-
Brake Service
-
Hub Service
-
Tire Sealant
plus
-
Frame tear down, clean, grease & reassembly
recommend adding suspension service annually
​
New Bike in a Can
The works, the Full Prep, Best you ever had Tune Up.
Includes Tune 3 + Fork & Shock Service w/ kits + Frame & Hub Bearing replacement w/ bearings (exceptions do apply)
This is the most complete tune up package you'll find. Perfect the the racer who's looking for pre season prep or the weekend warrior going on year 2 or 3 with out major service.
$1000 - 8 Hours
Minimum 10 day notice
Suspension!
The MTB BOX was built with suspension service as a priority. You all have it and it all needs service! Intervals and recommended procedures vary per manufacturer. Factory service is our bread and butter. As a Fox, Rockshox, DVO, and Ohlins dealer we have access to small parts, tools and documents to provide factory level service where every you are. ​​Easy rule, once a year service both fork and shock.
​
Custom tuning.... Not really our thing and this is why. Without a super fancy dnyo that can print a graph of the shock cylce before and after service. There's really no way to prove the tune is achieving the goals of the rider. Now we do have opportunity to change the factory shim stacks to other factory recommendations, but outside of that we are confident that a properly functioning and freshly serviced fork/shock to factory specs with appropriate settings and understanding will have your ride dialed.
Everything else will be billed at hourly rate of $100 rounded up to nearest 1/2 hour
Brakes
-
Brake Adjustments
-
Disc brake installation
-
Brake pad replacement
-
Hydraulic brake bleed
-
Hydraulic brake line installation
-
Brake cable & housing replacement
Cables
-
Derailleur cable replacement
-
Shimano Di2 installation
-
Internal cable routing
Derailleur
-
Derailleur adjustment
-
Derailleur install
-
Derailleur hanger alignment
Drivetrain
-
Chainring installation
-
Cassette installation
-
Chain installation
-
Chain guide/bash guard installation
-
Bottom bracket overhaul
-
Bottom bracket installation
-
Crankset installation
-
1x conversions
Dropper Post
-
Dropper post installation
-
Dropper post bleed/cable replacement
-
Dropper post rebuild
Forks
-
Suspension fork rebuild
-
Double crown fork overhaul
-
Steering tube Cut
-
Fork installation
-
Star nut Installation
-
Crown race removal/installation
-
Volume spacer installation
-
Fork travel change
​Handlebars
-
Shifter & dropper lever installation
-
Install handlebar
-
Replace handlebar grips & tape
​
Headset
-
Headset install
-
Headset service
Hubs
-
Hub adjustment
-
Hub overhaul
-
Thru-axle conversions
-
BOOST spacing conversions
-
Freehub body installation
Shocks
-
Shock installation
-
Shock rebuild
-
Suspension pivot bearing replacement
-
Install Volume Spacers
-
Setup
​
​
Wheel & Tire
-
Tubeless system installation
-
Install tire
-
Wheel true
-
Wheel builds
-
Replace spoke(s)
Misc
-
Box & ship bikes
-
Vehicle rack installations
-
Custom suspension setups
-
Build boxed bikes
Service Range & Labor Minimums
0-15 miles $200
Lake Elsinore, Menifee, Murrieta, Temecula
​
15-30 miles $400
Hemet, Fallbrook, Vista, San Marcos
​
30-60 miles $700​
​Corona, Riverside, Oceanside, Carlsbad
​
60- 100 miles $1000
Laguna, Encinitas, San Clemente, Big Bear
Alrighty, here's the deal. Currently homebase is Murrieta, which means starting point for every job. For door to door mobile service you must hit the minimums listed above. This is easily archived by selecting any two services on the request form or any tune up.
​
Have 2 or 3 bikes booked for further distances to hit service minimums.